Unable to backup sharepoint
Hi everybody! I'm having troubles while backing up Sharepoint 2010 over Windows Server 2008 R2. The job ends with status 2 and don't backup anything. This is the end of the detailed status of the job. Also I attach the bpresolver log, where I believe the problem is. I really can't see where is the problem, I followed all the steps from the Sharepoing GRT guide (HOWTO73100) but the error still.. Hope somebody can help me with this. Thansk a lot in advance.Solved5.6KViews0likes14CommentsBackup exec remote agent service stuck in stopping state.
I have face the below issue many times. Operating systame - Windows 2008 or Windows 2008 R2. Backup Exec 2012 having SP 3 installed. Most of the time when we restart the backup exec services, that time "Backup exec remote agent service" get stuck in stopping state. And in this stage we fail to stop and then start the service. Even taskkill command also desen't work to kill the beremote.exe process. And in this situation every time we require to reboot the server and then we found all backup exec services in running state properly. Does any one have solution on this? Regards, Santosh Pawar.1.3KViews1like4CommentsBackup Jobs are getting failed with V-79-57344-41488 - Due to one or more errors in \\server\E:, this backup cannot be used for conversion to virtual machines, Simplified Disaster Recovery (SDR), or a complete online restore.
Hello All, We are using Backup Exec 2014 SP2 In a Windows 2012 R2 server as a media server and taking backups of the Clients through Remote agent. Few are windows 2008 server and one of them is Windows 2012 R2 server. The issue started with the Win2012 R2 remote agent while backing up the backup is getting failed for the drives with the above mentioned error.The files are normal flat files. Media Server : Windows 2012 R2 64 bit Remote Agent : Windows 2012 R2 64 bit I have tried to take backup of those problematic folder through WIndows server backup however it got successful in that case. The account which we are using for taking backup is domain user however its been added to remote agents local admin too.But no luck. Would appreciate if any wrokariound or solution can be provided except asking for upgrade it to BE 15 ;) .Solved17KViews0likes10CommentsNetBackup 7.5 - NB client will not start because of Private Branch Exchange Service
I have a system which the NetBackup Client 7.5.0.3 and will not start because of the following error from the Event Viewer: > A timeout was reached (30000 milliseconds) while waiting for the Symantec Private Branch Exchange service to connect. > The Symantec Private Branch Exchange service failed to start due to the following error: >The service did not respond to the start or control request in a timely fashion. > A timeout was reached (30000 milliseconds) while waiting for the Symantec Private Branch Exchange service to connect. I have tried setting the time out to 60000, but it didn't work. Any ideas?964Views0likes5CommentsThe job failed with the following error
We have updated BackupExec from 2012 to 2014 and all job are running fine but on a few backup jobs i am receiving following error. In one job i am receiving following error.. Completed status: Failed Final error: 0xe000942a - Backup Exec did not find any resources to include in the backup. Check the backup selections for this job to make sure it includes resources that are available for backup. Final error category: System Errors For additional information regarding this error refer to link V-79-57344-37930 and another job is failing with following error: Completed status: Failed Final error: 0x2000fe07 - FS_NO_MORE Final error category: For additional information regarding this error refer to link V-79-8192-65031 Please help me out in this...Solved5.4KViews3likes3Commentsbackup jobs failing status 2505 and 252
backup jobs are failing as below 6/26/2014 00:26:29 - estimated 8946870 kbytes needed 06/26/2014 00:26:29 - Info nbjm (pid=3930) started backup (backupid=xxxxbp_1403735189) job for client xxxxxbp, policy xxx_i386_DATA_xxx01xxxbp_xxx01sybbp, schedule Daily_Incr on storage unit xxxxx01-hcart-robot-tld-0 06/26/2014 00:26:30 - Info bpbrm (pid=632) xxxxxxxbp is the host to backup data from 06/26/2014 00:26:30 - Info bpbrm (pid=632) reading file list from client 06/26/2014 00:26:30 - started process bpbrm (pid=632) 06/26/2014 00:26:30 - connecting 06/26/2014 00:26:31 - Info bpbrm (pid=632) starting bpbkar on client 06/26/2014 00:26:31 - Info bpbkar (pid=0) Starting bpstart_notify script 06/26/2014 00:26:31 - connected; connect time: 0:00:00 06/26/2014 00:26:40 - Info bpbkar (pid=0) Finished bpstart_notify script 06/26/2014 00:26:40 - Info bpbkar (pid=1620) Backup started 06/26/2014 00:26:40 - Info bpbrm (pid=632) bptm pid: 667 06/26/2014 00:26:41 - Info bptm (pid=667) start 06/26/2014 00:26:41 - Info bptm (pid=667) using 65536 data buffer size 06/26/2014 00:26:41 - Info bptm (pid=667) setting receive network buffer to 262144 bytes 06/26/2014 00:26:41 - Info bptm (pid=667) using 30 data buffers 06/26/2014 00:26:41 - Info bptm (pid=667) start backup 06/26/2014 00:26:41 - Info bptm (pid=667) backup child process is pid 669 06/26/2014 00:26:41 - Info bptm (pid=667) media id 5941L4 mounted on drive index 0, drivepath /dev/rmt/1cbn, drivename HP.ULTRIUM4-SCSI.000, copy 1 06/26/2014 00:26:41 - mounted 5941L4 06/26/2014 00:26:41 - positioning 5941L4 to file 737 06/26/2014 00:26:43 - positioned 5941L4; position time: 0:00:02 06/26/2014 00:26:43 - begin writing 06/26/2014 00:31:11 - Error bpbrm (pid=632) db_FLISTsend failed: Unable to connect to the database (2505) 06/26/2014 00:31:13 - Error bptm (pid=667) media manager terminated by parent process 06/26/2014 00:35:18 - Info bpbkar (pid=1620) done. status: 2505: Unable to connect to the database 06/26/2014 00:35:18 - end writing; write time: 0:08:35 Failed to get status code information (2505) what is the solution for error code 2505 ? I can see few jobs failed with status 2505 and few with 252 ? please help. Regards S.Solved9.6KViews1like13Commentsoprd returned abnormal status (96)
Hi, I am not able to get media manager daemons after bouncing Netbackup Daemons. And i got this error #./vmoprcmd -d oprd returned abnormal status (96) IPC Error: Daemon may not be running Logs of daemon & reqlib & ltid as below:- Ltid:- 01:21:23.746 [23332] <4> CheckShutdownWhileInit: Pid=1, Data.Pid=25157, Type=100, Param1=0, Param2=-5056, LongParam=-23490544 01:21:24.281 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-01 is ACTIVE 01:21:24.281 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-02 is ACTIVE 01:21:24.281 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-03 is ACTIVE 01:21:24.281 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-06 is ACTIVE 01:21:24.282 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-07 is ACTIVE 01:21:24.282 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-08 is ACTIVE 01:21:24.282 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-10 is ACTIVE 01:21:24.282 [23332] <16> InitLtidDeviceInfo: Drive DLT8000-12 is ACTIVE 01:21:24.282 [23332] <16> InitLtidDeviceInfo: Drive IBM_ULTRIUM2_Drv07 is ACTIVE reqlib:- 01:00:01.207 [23580] <2> EndpointSelector::select_endpoint: performing call with the only endpt available!(Endpoint_Selector.cpp:431) 01:00:01.220 [23580] <2> EndpointSelector::select_endpoint: performing call with the only endpt available!(Endpoint_Selector.cpp:431) 01:01:40.430 [23805] <4> vmoprcmd: INITIATING 01:01:40.488 [23805] <2> vmoprcmd: argv[0] = vmoprcmd 01:01:40.488 [23805] <2> vmoprcmd: argv[1] = -d 01:01:40.488 [23805] <2> vmdb_start_oprd: received request to start oprd, nosig = yes 01:01:40.527 [23805] <2> vnet_vnetd_service_socket: vnet_vnetd.c.2046: VN_REQUEST_SERVICE_SOCKET: 6 0x00000006 01:01:40.527 [23805] <2> vnet_vnetd_service_socket: vnet_vnetd.c.2060: service: vmd 01:01:40.623 [23805] <2> getrequestack: server response to request: REQUEST ACKNOWLEDGED 650 01:01:40.649 [23805] <2> getrequeststatus: server response: EXIT_STATUS 0 01:01:40.649 [23805] <4> vmdb_start_oprd: vmdb_start_oprd request status: successful (0) 01:02:57.220 [23805] <2> wait_oprd_ready: oprd response: EXIT_STATUS 278 01:02:57.221 [23805] <2> put_string: cannot write data to network: Broken pipe (32) 01:02:57.221 [23805] <16> send_string: unable to send data to socket: Broken pipe (32), stat=-5 Deamon:- 01:07:42.537 [24144] <4> rdevmi: INITIATING 01:07:42.537 [24144] <2> mm_getnodename: cached_hostname tcppapp001, cached_method 3 01:07:42.583 [24144] <2> mm_ncbp_gethostname: GetNBUName <tcppapp001-bip> 01:07:42.583 [24144] <2> mm_getnodename: (5) hostname tcppapp001-bip (from mm_ncbp_gethostname) 01:07:42.584 [24144] <2> rdevmi: got CONTINUE, connecting to ltid 01:08:02.755 [24098] <16> oprd: device management error: IPC Error: Daemon may not be running 01:08:03.241 [23355] <2> vmd: TCP_NODELAY 01:08:03.242 [23355] <4> peer_hostname: Connection from host tcppvmg265-bip, 172.16.6.7, port 6735 01:08:03.335 [23355] <4> process_request: client requested command=43, version=4 01:08:03.335 [23355] <4> process_request: START_OPRD requested 01:08:03.369 [23355] <4> start_oprd: /usr/openv/volmgr/bin/oprd, pid=24164 01:08:03.638 [23355] <2> vmd: TCP_NODELAY 01:08:03.638 [23355] <4> peer_hostname: Connection from host tcppvmg265-bip, 172.16.6.7, port 18394 01:08:03.685 [23355] <4> process_request: client requested command=43, version=4 01:08:03.685 [23355] <4> process_request: START_OPRD requested Please help me out how toget rid of this issue and what is this issue about.4.7KViews1like8CommentsDisk backups - automatic removal of expired files
I have a large disk storage that I do my backup to disk on then from there, backup to tape. I have an expiration date of 5 days. Question, what program does this cleanup and why does it work sometime and not other times?? Also, is there a place that you can set this program to run (specific date)? Thanks much CathySolved2.3KViews1like9CommentsBackup exec does not delete old jobs
Hi, I have this problem from time to time in about every version of backup exec I can think of over the years. From time to time, backup exec sends an alert saying to free space on the disk where it is backing up. So I have to manually delete the old .bkf files, even though the job is configured like this; Backup to a NAS, in the last case I had this problem,this NAS receives 1 backup per week, full, 2 servers backed up, 3 jobs in total (sql, exchange, data) Job is configured to keep for 2 days I would delete all the content of the directory where the backup is made, leaving only the 2 .cfg files. Then I would have a full wich will work, then next week when the second full would start, after a while, the job would still run until there is no free space (as I remember). So I manually delete the files of the first backup, go in alerts, respond to it, and the backup would countinue. This kind of problem happens from time to time, in about every type of configuration (we have multiple clients), to clients randomly. It seems that most of the time, it would delete old backups by itself, sometimes it does not, I have to do it manually. the only thing I could think of is when a problem appears during the backup and it does not complete, those .bkf files will not be deleted and over time, with other errors, these grow and take more and more space and are not deleted by backup exec automatically. We always use removable storage. Maybe there is a setting I did not see somewhere or something I must do to make sure that backup exec will delete old job as needed to free space. Any guidance would be appreciated. ThanksSolved6KViews1like9Comments